It is better to maintain your car compared to having it repaired to help run on original parts, which increases its lifespan. You can avoid making frequent visits to car repair shops by learning some basic car maintenance tips. Below are 6 DIY car maintenance tips you can handle to help you save money and avoid repair bills in the future.
1. Changing the spark plugs
You require first to establish the number of rubber plug wires on your car, which is subject to the number of cylinders. Some vehicles have up to eight cylinders. You should remove the spark plugs from the wires one at a time, according to the order, they have been installed. You will require to have a ratchet and a spark plug to remove the used plugs. Screw in the new plugs by hand before tightening it using a wrench.
2. Battery maintenance
You require a strong and long-lasting battery for your car to run smoothly. You can tell the condition of your battery by physical observation. Your battery must remain clean at the terminals. Use a screwdriver to loosen the terminals for cleaning. Pour baking soda or Coke on the terminals and use a wire brush to scrub. Rinse the terminals using clean water and allow them to dry before placing them back.
3. Changing your engine oil
Open the engine oil drain cap, found under the engine and place a container to collect the used oil. Close the drain cap and then use a funnel to add fresh engine oil at the bonnet. It is advisable to keep checking the engine oil level using the dipstick.
4. Cleaning the radiator and cooling system
Your car pick up dirt during operation, which is deposited in its cooling system and can disrupt optimal performance. Regular radiator flushes can help keep your car engine in top condition. Firstly, ensure your car has completely cooled down. Open the radiator drain plug and place the coolant receptacle in readiness for the draining process. Use a funnel to add the radiator flush together with some water. Close the radiator cap and start the engine. Wait till it gets to the normal temperature and then switch it off to allow the coolant to cool down. Drain the radiator and refill it using fresh coolant.
5. Replacing brake pads
Brake pads require to be changed every 20,000 miles. Start by safely jacking your car to remove the wheels. Remove the caliper to access the old brake pads. Insert the new brake pads and then compress the piston. Screw the brake piston to the back of the caliper assembly. Finish by re-installing the brake caliper before placing back the wheel.
6. Replacing the air filters
Your vehicle needs proper air ventilation for optimal performance. You should replace the air filters every 12 months or covering 12,000 miles. You can do this at home in the garage. Start by opening your car’s hood and opening the rectangular-shaped filter enclosure to replace the air filter.
Maintaining your car in good shape can help you avoid costly repairs and facilitate its resale. Have an updated record of services and maintenance on your car. Car maintenance does not only helps to keep your car running in good condition but also helps in its resale.